SPESIFIKASI SUZUKI TITAN 115 VS SMASH 110

SPESIFIKASI SUZUKI TITAN 115 DAN SMASH 110

Kompas.com/Zulkifli BJ & Suzuki

What is the difference with the Suzuki Smash 115 Smash 110 Titans? "Titan's new total, both engine and model," said Joko Utomo, GM Sales PT Indomobil Suzuki Wheels-2. In accordance with additional points behind, there is a difference in engine capacity. If Smash 110 cc, 115 cc of the Titan. "Actually, only increased by 3 cc or a 113 cc," added Surya Setiawan, Director of Marketing SIS R-2.

With changes to the engine's performance is slightly better than Titan Smash. In Thailand, this is called the New Smash Titans, while the old version with a machine called Smash Revo 110.

Dimensions
From the dimensions have not changed much. However, a longer wheelbase 15 mm (see table). Nevertheless, according to data from PT SIS, apparently more severe standard Titan 4 kg of Smash. When using the casting wheel disc brakes, the weight increased 2 kg so the total weight of 102 kg.

Appearances
A glimpse of the lights and the front hood is similar because of the format and placement of the headlights Sein lights on the front hood similar. However, the rear of the Titan round headlights, while Smash sharp angle. Sein position lights are also below. Design front sepatbor also different.

Instrument panel
Titan 3D design consists of two parts, the speedometer and white-month basis, in no trip meters with a black base. Dental indicators, ranging from below, upward.

Exhaust and rear lights
Encrusted chrome exhaust only. Titans plain, without accentuation as Smash. The rear lights, although the same format in the middle of the red and white on the side, there is little difference in the corners of the lamp. Then, stirrup or holding back on Titan painted black.

Machinery
Additional capacity is done by changing the diameter and the step machine. Titan's engine is more upright position and the valve is longer. It is equipped with a throttle position switch (TPS), which is also used in the Shogun.

Titan Machinery, is a long type of stroke or stride. It can be seen with 51 mm diameter cylinder and measures 55.2 mm or 7.6 mm longer than Smash 110.

The result, engine power increased 0.1 PS, while torque is a significant increase, which is 1.7 Nm. This change was done so that more efficient fuel consumption.

GAMBAR MODIFIKASI BINTER MERZY|ANACONDA STYLE

GAMBAR MODIFIKASI BINTER MERZY|ANACONDA STYLE

Creativity Raynaldo Handoko from Semarang is worthy of two thumbs. How not. Only capital Binter machine merzy KZ-200-fed friends in Australia now-Modified BJM retainer which also traders of variation, as well as importers of waste moge chopper builder is able to create a sangar ProStreet.

Raynaldo here, which is familiarly called Han-Han, to utilize existing mengumbar ideas in his brain. The choice, in the style of genre masterpieces American chopper styling. "The idea is to see from the plots Chica Custom Chopper, United States," he explained.

He relied on in creating handmade. Starting from the frame, body, taped up trappings variations. In addition, he has cultivated a strong detail and have a draft.

Almost all of the side until Footstep, standards, and the brake lever is formed through the taste appealing. "His name is also handmade, we become more flexible in creating," he explained.

To frame constructed of pipe scudule 3 / 4 dim formed neatly and precisely measured. Because, rather than merely being pursued wonderful, but can be used comfortably. "Do not get in a good shape, but when it climbed only baseball center because of faulty design," added Han-Han.

Anaconda wearing body resembling a galvanized plate. Technically, the cultivation of 0.8-mm plate materials is quite complicated. Have to be patient and neat and symmetrical because not enough just to set up master and print like fiberglass.

"That's where his art. In addition to consideration as well as connect the body from front to back, it must seem sturdy plastic and does not impress," why choose disposable plates.

Another performance of the work of the prominent Han-Han, see the distinctive exhaust design tastes of the chopperis. Two short lengths of pipe bending slope at the side of the machine. Then, air filter, swing arm, and several sharp curves dominated motor side, supporting the body design of Anaconda.

KAWASAKI NINJA 250R PIALA DUNIA 2010|GRAFIS BENDERA NEGARA

KAWASAKI NINJA 250R WORLD CUP 2010|GRAFIS BENDERA NEGARA

The new 2010 World Cup held in mid-June to come be a momentum by all circles. Not just from the business, but also from the motor club communities, all in favor of his favorite teams.

This is as shown four members of the community Ninja 250R South Chapter. These four types of motor sport flags of their home countries digrafis four teams that appeared in South Africa.

Techniques rely on cutting sticker, almost the entire body is covered with the flag. "Coming to this moment of the 2010 World Cup, we compete with the graphical banner besutan beautify the participating countries we support," said Dian Beet, Vice Chairman of the South Chapter of Ninja 250R.

The process worked by Wien's graphical Sticker which hung on Jl Radio In Block F4, South Jakarta. Length of cultivating two to three days. However, it will be enough to cut the time if done with airbrush techniques.

"The question of price, it varies, depending on the level of difficulty of design. For the entire body Ninja 250R, ranging from Rp 800,000 to Rp 1 million," said Dian.

View Ninja 250R is no longer standard. For example, a single seat changed. "Alteration in the tail make it look more sporty Ninja 250," said King, a seat behind closed carbon fiber material.

Dian and Lilly also have to look different. Both have applied the body that mimic the motor behind the Ducati 848 Superbike. That way, it looks so much more sexy.

GAMBAR MODIFIKASI MIO Kombinasi "Low Rider" dan "Chopper"

MODIFIKASI YAMAHA MIO Kombinasi "Low Rider" dan "Chopper"

Junaidi Saputra origin Medan, North Sumatra, try to develop a modification of the flow of low rider again. Indeed, judging from the appearance of his works Yamaha Mio Sporty, a strong impression that the modifier only elongate the axle which is characteristic of low rider. But, if the scrutiny is true, there are experiments that looked at skutik garputala's logo.

'As seen on the front and rear wheels, a long follow-up, "said Junaidi, builder Admair Thula (AT) based in Medan. Total length of the motor to be 3.5 meters. That is, the dimension of about one meter stretch Mio.

Departed long-departed, said Junaidi, up to 32 cm. This does not include the tip of the outer tire. However, there is a unique on-departed departed these parts. When construction is typically shaped letter "H", here he makes a model "J".

"To be strong due to a rim and engine load, the material is taken from galvanized," he explained. This business should ever thumbs up. Imagine, with the rear wheels are super-wide, the device remains in the middle. If viewed from the application of the tire and rim, then surely this Mio into Bobber style.

To adjust the rear that has been overly delayed, the house re-CVT revamped. Way, the plate was cut and add 8 inches to adjust with the back, although his position does not quite fit because it was too out of place.

Front wheel chopper-like models in the Harley-proved difficult to maneuver. Small turning radius is very similar to HD-style chopper motorcycle. Changes made by sliding out and replace komstir triangle shaped straight baseball again, but it resembles a "V".

When asked by berziga-zag path between the line of cones, the motor seemed distress. In fact, the rider must go down feet many times. Nevertheless, Junaidi dared to take his road test more than 5 km.